|
Welding and fabrication St Augustine fl.
This page with it's 100's of pictures below, is dedicated to our fabrication and welding service.
My welding business is available for all levels of welding- from all types of repair to fabrication, where we design, build and weld something from scratch.
We can build your dream design. Or you tell us what you want the end result to be, and we design it and fabricate it.
I have a strong background in design and am excellent at figuring out the best way to achieve something. This is probably my most valuable quality that separates me from the other welders in the area.
Before I opened my welding service, I made my living doing engineering. My specialty is problem solving and creating design solutions.
Tell me the problem you want to solve, or the end result you want to see, and I will deliver solutions you will love. I can figure out how to achieve it.
The first project this page is going to share with you, a builder wanted some custom steel columns made for a remodel job he was doing.
Here is the rough sketch he brought to me.
I asked the builder questions until I understood exactly what he wanted. Then I began cutting steel, drilling holes, measuring angles and welding the metal components together.
Below here is a picture documentary of the weld/fabrication process it took to build his columns in my fabrication shop.
On this page I have not included explanations of the process of each picture. If you would like further information on the process , there will be a link on the bottom of the page.
These four custom steel columns are now fully fabricated and complete. The builder wants to clean and paint them himself. Now its time to install them in the building they will be holding up.
I did not do the install. The builder did.
Now its one year later and all the construction is finished. Here are the after pictures.
I hope you enjoyed these steel welded column fabrication pictures.
Now you will see a roll out drawer being fabricated that contains a generator in its theft proof cage, on a mobile escape room tractor trailer.
This picture summary does not contain explanations of what's going on and why.
But at the bottom of the page, will be a link that takes you to the full documentary of the design, fabrication and build, including explanations of what we are doing and the why's.
Since my background was in engineering and design before I started my welding service, I am adept at creating solutions to problems.
So this is what I designed and then fabricated and welded.
ABOVE: Drawer all the way out.
BELOW: Drawer 1/2 way out.
BELOW: Drawer almost all the way in.
And fully in.
All the way out, then half way in.
And further in.
And all the way in.
Now you get to see a aluminum bow fishing, gigging platform being designed, fabricated and built.
If you want to read the build explanations of what's going on, then at the bottom of this page is a link to this entire bow fishing platform being fabricated and welded. But this page only shows half the pictures without the explanations.
platforms.
He loves it. Its nice and rigid, and very light weight.
If you want to see the whole documentary on the steel columns being built, click here (CUSTOM STEEL COLUMNS WELDED & FABRICATED). It has many more pictures and and full series of explanations of all that was done to accomplish the fabrication and what the goal parameters were.
If you want to see the whole documentary on the mobile escape room generator cage being built, click here (CUSTOM GENERATOR CAGE WELDED & FABRICATED). It has many more pictures and and full series of explanations of all that was done to accomplish the fabrication.
If you want to see the whole documentary on the aluminum gigging, bow fishing platform being designed, fabricated and welded, click here (Gigging, Bow Fishing platform design, WELDED & FABRICATED). It has many more pictures and and full series of explanations of all that was done to accomplish the fabrication.
|
Remember, I work by appointment only, so be sure to call and schedule us. 904-638-8338 Call me, 8 Am to 9 Pm, any day of the week.
Questions or comments, feel free to call.
Our company name is "After Hours Welding & Trailer Repair." We serve all of St Johns County and surrounding areas.
We do very low-priced, competent & quality work, by appointments only any day of the week. Yes weekends and holidays to.
Call anytime thanks to the magic of cell phones, I probably am available to answer you're questions.
Without hesitation, call me at 904-638-8338 I'll be happy to give you the information
needed in order for you to make a wise, informed purchasing decision.
|
St Augustine Florida 
